Block copolymers containing polyacrylamide and polyacrylic acid: Bulk structure and hydrogen bonds system

Asymmetric block copolymers PAAc-b-PAAm (DBCs) and PAAm-b-PAAc-b-PAAm (TBCs) comprised poly(acrylic acid) blocks of constant chain length and polyacrylamide blocks of variable chain length were synthesized using RAFT/MADIX technique. Their properties in a bulk state were studied by differential scanning calorimetry and the hydrogen bond system was investigated by Fourier transform infrared spectroscopy. It was found that DBCs and TBCs possess a homogeneous amorphous structure, whose temperatures of glass transition and destruction beginning increased with growth of PAAm block length. The H-bond system between PAAc and PAAm blocks was most developed in TBC sample and formed manly by the mixed cyclic dimmers of carboxyl and amide groups.     

The Use of Derivative Thermogravimetry to Estimate Degree of Thermal Degradation

It is difficult to estimate the degree of thermal degradation which has taken place in complex parts composed of cellulosics and polymeric insulation unless complete failure has occurred. There is a definite need for a parameter which can quickly and easily measure the relative degree of thermal attack on organic insulation subjected to various known environmental and processing conditions. This paper reports preliminary work using derivative thermogravimetry to perform this function. Derivative thermogravimetric analysis (TGA) was used to produce a value, TGA Index, related to the peak height of the major TGA derivative signal. This TGA Index was found to correlate with the copper number of insulating paper measured after thermal degradation. The application of TGA Index to evaluation of polymer degradation after thermal shock, water absorption, and accelerated UV attack is also discussed. Finally, preliminary studies on the use of derivative TGA to evaluate coatings exposed to various outdoor environments around the country are reported.     

Functional Monomers and Polymers. 145. Synthetic Application Based on the Tautomerism of Polymer-Bound Purine and Pyrimidine Bases

Polymer-bound alkylthiopurine and -pyrimidine bases were prepared and used as the polymeric reagents for the reactions of nitrile, olefin, and enone formation. The corresponding low molecular weight compounds were also prepared for comparison. Differences in the reactivity of these reagents were related to the change in tautomerism of the purine and pyrimidine moieties.     

Azimuthal orientational correlations due to excluded volume epitaxy in growing anisotropic grains

The microstructure of anisotropically shaped grains can strongly influence a range of material properties, including transport, mechanical and electro-optical. A grain-structure-related phenomenon, known as excluded volume epitaxy (EVE), is reported in this study. EVE is a local, inter-grain orientational correlations effect, which results from a combination of continuous nucleation of anisotropic grains and impingement of growing grains. Due to EVE, anisotropically shaped grains have a tendency to be similarly aligned in a local neighbourhood, despite the absence of any forced global orientation in the sample. The effect has been repeatedly observed by the authors in block copolymers, as illustrated by a representative TEM image. Optical microscopy of anisotropically shaped non-polymeric crystals revealed the generality of this effect. The simulation study revealed a tendency for azimuthal, inter-grain orientational correlation and re-confirmed the experimental observation of EVE.     

Effect of Injection Parameters and Addition of Nanoscale Materials on the Shrinkage of Polypropylene Copolymer

The effect of variation of injection conditions and addition of nano-calcium carbonate (CaCO₃), nano-silicon dioxide (SiO₂) and full-vulcanized nano-powdered styrene butadiene rubber (PSBR) on the shrinkage of injection-molded polypropylene-ethylene copolymer (90/10, co-PP) were investigated. The results showed that the shrinkage was different for different locations along the flow path. The shrinkage in the length direction of the injection-molded sample varied with the adjustment of the processing parameters, while the shrinkage in the width and thickness direction was almost unchanged. The addition of nano-CaCO₃ and PSBR decreased the shrinkage of co-PP, while the shrinkage of co-PP/ SiO₂ composite was almost unchanged.     

以聚乙二醇-b-聚四乙烯基吡啶为模板制备聚联苯胺微/纳米颗粒及其电容特性

以两亲性嵌段共聚物聚乙二醇-b-聚四乙烯基吡啶(PEO-b-P4VP)为模板制备聚联苯胺微/纳米颗粒,调节模板剂胶束溶液pH,得到了一系列形貌和尺寸可控的聚联苯胺微/纳米颗粒。利用红外光谱、核磁共振、透射电镜、循环伏安、恒电流放电、交流阻抗等测试对材料的结构和性能进行了表征。模板法合成的聚联苯胺为平均直径小于200nm的亚微米至纳米级棒状颗粒,其直径随着模板剂胶束溶液pH的降低而增加。所得聚联苯胺颗粒均显示了一定的电化学活性,当电流密度为1A/g时,聚联苯胺的比电容量达到306.3F/g,经过长时间的充放电测试,不同条件下合成的聚联苯胺的容量衰减率均很小,表现出良好的循环稳定性且各样品电化学性能呈现出随着直径的减小而增强的趋势。     

溶剂去除速度对于溶剂退火薄膜相形貌的影响

以聚苯乙烯-聚4-乙烯基吡啶(PS-b-P4VP)嵌段共聚物作为研究对象,采用DMF作为退火溶剂,以原子力显微镜(AFM)和透射电子显微镜(TEM)为表征手段,研究了溶剂退火后期溶胀薄膜中溶剂的去除速度对于薄膜相形貌的影响,发现通过改变溶剂去除速度可以有效的调控薄膜中的形貌.当薄膜厚度为35 nm时,DMF的快速挥发会导致薄膜中形成以PS为分散相的反转柱状相结构,当降低溶剂的挥发速度时,薄膜中形成了以PS为分散相的环状形貌,当进一步减缓挥发速度时,薄膜中将形成台阶状的片层结构;然而当薄膜厚度为55 nm时,溶剂退火后期薄膜中形成的是以P4VP为分散相的正常柱状相结构,在相同溶剂去除速度条件下薄膜相形貌变化较小.     

Synthesis of poly(n‐butyl acrylate) homopolymer and poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) triblock copolymer via AGET emulsion ATRP using a cationic surfactant

Cationic emulsions of triblock copolymer particles comprising a poly(n‐butyl acrylate) (PⁿBA) central block and polystyrene (PS) outer blocks were synthesized by activator generated by electron transfer (AGET) atom transfer radical polymerization (ATRP). Difunctional ATRP initiator, ethylene bis(2‐bromoisobutyrate) (EBBiB), was used as initiator to synthesize the ABA type poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) (PS‐PⁿBA‐PS) triblock copolymer. The effects of ligand and cationic surfactant on polymerizations were also discussed. Gel permeation chromatography (GPC) was used to characterize the molecular weight (M_n) and molecular weight distribution (MWD) of the resultant triblock copolymers. Particle size and particle size distribution of resulted latexes were characterized by dynamic light scattering (DLS). The resultant latexes showed good colloidal stability with average particle size around 100–300 nm in diameter. Glass transition temperature (T_g) of copolymers was studied by differential scanning calorimetry (DSC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 611–620     

Hyperbranched block copolymer from AB2 macromonomer: Synthesis and its reaction‐induced microphase separation in epoxy thermosets

In this contribution, we reported the synthesis of a hyperbranched block copolymer composed of poly(ε‐caprolactone) (PCL) and polystyrene (PS) subchains. Toward this end, we first synthesized an α‐alkynyl‐ and ω,ω′‐diazido‐terminated PCL‐b‐(PS)₂ macromonomer via the combination of ring‐opening polymerization and atom transfer radical polymerization. By the use of this AB₂ macromonomer, the hyperbranched block copolymer (h‐[PCL‐b‐(PS)₂]) was synthesized via a copper‐catalyzed Huisgen 1,3‐dipolar cycloaddition (i.e., click reaction) polymerization. The hyperbranched block copolymer was characterized by means of ¹H nuclear magnetic resonance spectroscopy and gel permeation chromatography. Both differential scanning calorimetry and atomic force microscopy showed that the hyperbranched block copolymer was microphase‐separated in bulk. While this hyperbranched block copolymer was incorporated into epoxy, the nanostructured thermosets were successfully obtained; the formation of the nanophases in epoxy followed reaction‐induced microphase separation mechanism as evidenced by atomic force microscopy, small angle X‐ray scattering, and dynamic mechanical thermal analysis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 368–380